•
1 3

Bosch Rexroth

Digital output module XI250204 ctrlX I/O 4-channel (24 VDC, 0.5 A, 2-wire, high-speed, DC-sync) - R911421645

Digital output module XI250204 ctrlX I/O 4-channel (24 VDC, 0.5 A, 2-wire, high-speed, DC-sync) - R911421645

€116,00 EUR
€116,00 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.
Auf Lager - Lieferzeit 2-5 Werktage*

The XI250204 digital output module is used to output binary 24 V control signals to a ctrlX I/O station. The terminal block has four channels and uses a two-wire connection. The short-circuit-proof push-pull output actively switches to 24 V or 0 V and has a low output delay. Signal output is DC-synchronous. The signal status is indicated by the channel LED on the detachable peripheral connector. The digital outputs are powered by the 24 V supply from the UP (fuse box).

The logic and peripheral power supply as well as the EtherCAT-based module communication are forwarded through the module.

The corresponding ESI files are available for integration into the higher-level system.

Technical data

General technical data

  • Number of outputs: 4
  • Connection type: Push-in terminal
  • Connection technology: 2-wire technology
  • Maximum output current: 0.5 A per channel; the GND contact assigned to the channel must not be loaded above the maximum output current of 0.5 A.
  • Total current of the channels: max. 2 A
  • Rated load: Resistive, maximum 12 W (48 Ω; at rated voltage)
  • Minimum: Load 10 kΩ
  • Rise time (TRise): No load: 300 ns at 20 kΩ, Resistive load: 330 μs at 48 Ω, 500 mA
  • Drop-out time (TFALL): No load: 276 ns at 20 kΩ, Resistive load: 30 ns at 48 Ω, 500 mA
  • Inductive shutdown energy: Maximum 150 mJ per channel
  • Overload behavior: Channel-granular shutdown with limiting of the edge steepness and automatic
    Restart; short-circuit proof in push and pull operation
  • Backfeed resistance: Not backfeed resistant, external precautions necessary
  • Nominal voltage (UL/UP): DC 24 V (19.2 V to 30 V, inclusive)
    Tolerance and residual ripple) PELV/SELV (Safety Extra Low Voltage)
  • Current consumption UL: 35 mA
  • Current consumption UP: 15 mA + load
  • Maximum power consumption of the module: 1.45 W
  • Bit width in the process image: 1 byte (4 bits used)
  • Configuration: No address or configuration setting
    necessary
  • Dimensions: 12 mm × 105 mm × 99 mm (width × height × depth)
  • Weight: 95 g (module including connector)
  • Potential isolation: DC 1200 V UP to UL, DC 707 V UP/UL to FE, tested for 60 s each (not evaluated by UL)
  • EMC resistance: According to EN 61000-6-2 and EN 61000-6-4
  • Installation position: Vertical, on a horizontal support rail
  • Markings, approvals: CE, UKCA, UL

Downloads

Operating instructions

ESI files

*Applies to deliveries to Germany. Delivery times for other countries and information on calculating the delivery date can be found here .

View full details