•
1 3

Bosch Rexroth

Analog output module XI412204 ctrlX I/O 4-channel (0 to 10 V, 16 bit) - R911406116

Analog output module XI412204 ctrlX I/O 4-channel (0 to 10 V, 16 bit) - R911406116

€351,00 EUR
€351,00 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.
Auf Lager. In 2–5  Tagen bei dir.
Legal guarantee rights
Legal guarantee rights Download document

The XI412204 analog output terminal generates output signals in the range of 0 to 10 V in a ctrlX I/O station. The output signal is galvanically isolated from the system level and has a resolution of 16 bits. The four output channels share a common ground potential. The output stages are powered by the 24 V supply from U<sub> P</sub>. fed.

The logic and peripheral power supply as well as the EtherCAT-based module communication are forwarded through the module.

The corresponding ESI files are available for integration into the higher-level system.

Technical data

General technical data:

  • Number of outputs: 4
  • Connection type: push-in terminal
  • Connection technology: 2-wire bipolar, shielded, twisted pair
  • Output signal: 0 V to 10 V
  • Output load: ≥ 5 kΩ
  • D/A resolution: 16 bit
  • Accuracy: Typical ±0.1% of full scale (FSV), maximum ±0.25% of full scale (FSV) (depending on load, aging, and temperature drift)
  • Process data update: 250 μs
  • Overload protection: Yes
  • Power supply: UP via the jumper contacts
  • Nominal voltage (UL / UP): DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage)
  • Current consumption UL: Max. 40 mA
  • Current consumption UP: Max. 55 mA
  • Maximum power consumption of the module: 2.45 W
  • Bit width of output data in the process data image: 8 bytes (channel-granular adjustable)
  • Bit width input data in the process data image
    (including fill bits): 10 bytes in standard representation, 2 bytes in “compact” representation (channel-granular adjustable)
  • Parameterization: Via ctrlX Works (startup parameters)
  • Configuration: No address or configuration setting required
  • Dimensions: 12 mm × 105 mm × 99 mm (width × height × depth)
  • Weight: 100 g (module including connector)
  • Electrical isolation: DC 1211 V UP to UL, DC 707 V UP/UL to FE (not evaluated by UL)
  • EMC immunity: According to EN 61000-6-2 and EN 61000-6-4
  • Installation position: Vertical, on a horizontal mounting rail
  • Marking, approvals: CE, UKCA, UL (⮫ File No. E210730)

Downloads

Operating instructions

ESI files

*Applies to deliveries to Germany. Delivery times for other countries and information on calculating the delivery date can be found here .

View full details